Palm IIIe Handbook page 164

Disabling Call Waiting
Call Waiting can cause your session to terminate if you receive a call
while you are connected. If your telephone has Call Waiting, you need
to disable this feature before logging into your ISP or dial-in server.
To disable Call Waiting:
1. Tap the Disable call waiting check box to select it.
Select this
box if you
need to
disable Call
Waiting
2. Enter the code to disable Call Waiting on the Disable call waiting
line.
Note: Each telephone company assigns a code to disable Call
Waiting. Contact your local telephone company for the
code that is appropriate for you.
3. Tap OK.
Using a calling card
The Use calling card field enables you to use your calling card when
dialing your ISP or Intranet server. Keep in mind that there is usually
a delay before you enter your calling card number. When you define
your calling card number, you need to add commas at the beginning
to compensate for this delay. Each comma delays transmission of your
calling card number for two seconds.
To use a calling card:
1. Tap the Use calling card check box to select it.
Page 164
Enter your disable
code here
Chapter 7