Preparing Your Organizer - Palm IIIe Handbook

Preparing your organizer

There are a few steps you must perform to prepare your organizer for
a modem HotSync operation.
To prepare your organizer for a modem HotSync operation:
1. Tap the Applications icon
2. Tap the HotSync icon
3. Tap the Enter Phone # field.
Note: If you plan to connect to your company's dial-in server
(network modem) instead of connecting to a computer
modem, see "Conducting a HotSync operation via a
network" later in this chapter.
4. Enter the telephone number to access the modem connected to
your computer.
5. If needed, enter a dial prefix (such as "9") to access an outside line,
and then tap the Dial Prefix check box.
Tip: You can enter a comma in the field to introduce a "pause"
in the dialing sequence.
6. If the phone line you're using for the organizer has Call Waiting,
select the Disable call waiting check box to avoid an interruption
during the modem HotSync operation.
7. If you want to use a calling card to place the call, select the check
box and enter the calling card number.
8. Tap OK.
9. Tap the Menu icon
10. Tap Options, and then tap Modem Setup.
Chapter 6
.
.
.
Page 147