IBM MT 2369 Maintenance Manual page 62

Product overview
Key
combination
Fn+F8
Fn+F9
Fn+F10
Fn+F11
Fn+F12
Fn+PgUp
Fn+Home
Fn+End
Fn+Spacebar
58
MT 2369/2370/2371/2372/2382/2386
Description
Display expansion
Horizontal/Vertical screen expansion (hardware
stretch) function is enabled, so that VGA mode
screen will be expanded to whole size of SVGA
LCD or XGA LCD.
Note:
1. In ACPI OS (Windows XP, Windows 2000,
and later), this function is not supported.
2. When hardware overlay screen or 3D full
screen application is active, this
hotkey-function will be disabled.
Issue device ejection
Opens the IBM ThinkPad EasyEject Utility
screen. Buttons for the following choices are
displayed:
v Run EasyEject Actions: User can select,
stop, and remove external devices connected
to the ThinkPad computer.
v Configure EasyEject Actions: User can
open the IBM ThinkPad EasyEject Utility
main window.
v Fn+F9 Settings: User can configure the
settings for the Fn+F9 function.
Note: This function is supported only in
Windows XP and Windows 2000.
Reserved.
Reserved.
Hibernation
Turn hibernation mode on. To return to normal
operation, press the power button for less than
four seconds.
Note: To use Fn+F12 for hibernation in
Windows XP and Windows 2000, the IBM PM
device driver must have been installed on the
computer.
ThinkPad light
Note: This function is supported only on the
ThinkPad computer that have the ThinkLight.
The on or off status of the ThinkLight is shown
on the screen for a few seconds when the user
press Fn+PgUp.
LCD brightness up
The LCD becomes brighter.
LCD brightness down
The LCD becomes less bright.
FullScreen magnifier
Enable the FullScreen Magnifier function.