Positioning The Rebel Treadmill 1000 - RebelDesk 1000 Owner's Manual

POSITIONING THE REBEL TREADMILL 1000

WARNING! Use caution when lifting and moving the Rebel Treadmill 1000.
Obtain assistance if needed.
The Rebel Treadmill 1000 is for use with a standing-height desk only. Do not operate the machine
unless it is positioned at a desk.
The Rebel Treadmill 1000 is equipped with wheels for easy mobility. To position the machine, first
ensure that the master power switch is in the OFF position and the power cord is unplugged from the
machine. Grasp each side of the rear of the machine and lift. Roll the machine forward on the front
wheels.
Place the Rebel Treadmill 1000 underneath a standing-height desk at a location that is comfortable
for you. An example is illustrated below.
Make sure that the Rebel Treadmill 1000 is on a level surface. You can level the machine by
adjusting the feet on the bottom of it. To adjust the feet either higher or lower, raise the machine
slightly and turn the feet. Obtain assistance if needed.
5