Plugging In The Rebel Treadmill 1000 - RebelDesk 1000 Owner's Manual

PLUGGING IN THE REBEL TREADMILL 1000

To operate the Rebel Treadmill 1000, it must be plugged into a grounded electrical outlet.
(See the illustration below).
IMPORTANT INFORMATION ABOUT ELECTRIC VOLTAGE
The Rebel Treadmill 1000 is for use on a nominal 120-V circuit. It should be plugged
into a grounded outlet as shown below.
Use of a grounded outlet reduces the risk of electric shock. Use of the wrong voltage will
damage the machine. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with local codes and ordinances. Before plugging the
power cord into an electrical outlet, verify that the voltage requirements for the electrical
outlet that you plan to use match the voltage of the Rebel Treadmill 1000.
The power requirements for this machine include a grounded, dedicated circuit, rated for
115VAC +- 5%, 60Hz and 20amps.
WARNING! Do not use the Rebel Treadmill 1000 with a voltage adapter.
Do not use the Rebel Treadmill 1000 with an extension cord.
Do not modify the plug provided with the Rebel Treadmill 1000. If the plug will
not fit the outlet, have a proper outlet installed by a qualified electrician.
DANGER! Improper connection can result in a risk of electric shock.
Check with a qualified electrician or service provider if you are in doubt as to
whether the Rebel Treadmill 1000 is properly connected.
Once the Rebel Treadmill 1000 is properly plugged in, you may turn the switch at the front of
the machine to the ON position.
7