Control Panel Operation - RebelDesk 1000 Owner's Manual

CONTROL PANEL OPERATION

The overlay of the control panel
Instructions for Operating the Control Panel
START
STOP
VIEW
SPEED
TIME
DISTANCE
SPEED (-)
SPEED (+)
EMERGENCY
STOP
Other notes about the control panel operation:
•
After you press STOP, you can return to the speed at which you were walking
immediately prior to stopping. To do so, you must press the START button within
twenty (20) minutes of pressing STOP.
•
After twenty minutes, the control panel will beep (if the sound is actived) and reset.
When you press START again, the machine will go to 0.5 mph. The time and distance
will start over as well
Starts the treadmill belt moving.
The machine automatically will go to 0.5 mph.
Stops the treadmill belt from moving.
Allows you to change the display to show Time, Speed, or
Distance.
Allows you to turn the sound on or off.
To adjust the sound, press and hold the VIEW button for two
seconds before you press START.
Indicates miles per hour that you are walking.
Indicates the time that you have walked.
Time is displayed in hours and minutes.
Indicates the distance in miles that you have travelled.
Adjusts the speed lower in 0.1 mph increments.
The minimum speed at which the machine can operate is 0.5 mph.
Adjusts the speed faster in 0.1 mph increments.
The maximum speed at which the machine can operate is 2.0 mph.
Stops the treadmill immediately.
Clip the emergency stop cord to your clothing for activation in the
event of an emergency.
.
11