Storage Instructions - DSR INC-700A Owner's Manual

Industrial series power supply/battery charger
Table of Contents

Advertisement

Available languages

Available languages

13.3
After every 100 hours or
whenever you see dust
accumulating on the fan
blades, you should clean
both fans using com-
pressed air (as shown).
NOTE: Use the com-
pressed air on the fan
blades only. Do not blow
dirt into the fan shaft or
bearing.
These fans push a lot of air
and are precision balanced.
Excessive dirt and grime
buildup will cause the fan
to be unbalanced and wear
out quickly. If the fans fail, the charger may overheat and the thermal pro-
tection of the charger will shut it down.
13.4
Ensure that all of the charger components are in place and in good work-
ing condition, including the plastic boots on the battery clips.
13.5
Servicing does not require opening the unit, as there are no user-service-
able parts.
14.

STORAGE INSTRUCTIONS

14.1
Store the charger unplugged, in an upright condition. The cord will still
conduct electricity until it is unplugged from the outlet.
14.2
Store inside, in a dry, cool place (unless you're using an on-board Marine
Charger ).
14.3
Do not store the clips on the handle, clipped together, on or around metal,
or clipped to cables.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents