Description Of Components; Before Use; Instructions For Use - Binatone MEJ-1788 Instruction Manual

After using the appliance let it cool for a few minutes. After that
you can boil water in it again.

DESCRIPTION OF COMPONENTS

1. Metal housing
2. Hinged lid
3. Lid opening button
4. Removable filter
5. Water level scale
6. On-off switch
7. Power indicator
8. Cord storage base
make sure that there are no foreign items in it.
soapy water, rinse carefully and wipe dry. In case
of unusual odor fill the kettle up to a maximum level
with vinegar solution (1 element of 9 % vinegar
per 20 elements of water), let the kettle soak for
an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.

INSTRUCTIONS FOR USE

1.
2.
3.
(2) and put the kettle on the base (8).
4. Close the lid
5. Put the plug in the socket making sure that the mains supply
matches the voltage requirements indicated on the appliance.
6. Switch the kettle on by the on/off switch
will go on showing that the water is being boiled.
7. The appliance will automatically turn off as soon as water boils.
You may also manually switch the kettle off before the boiling
process is complete using the on/off switch (6).
8. While pouring water out of the kettle tilt it slightly and gradually.
Remember that there is hot water inside the kettle.
9. If water goes cool, and you want to re-boil (or heat) it again, turn
the kettle on again.

BEFORE USE

Remove all packing materials from appliance;
Wash internal surface of kettle with warm
Place the kettle with power base on dry
horizontal surface.
Take the kettle off the base
(2) by pushing the button (3) and fill the kettle
with water.
Make sure the water level stays between the
minimum and the maximum marks on the water
level scale (5). Do not switch on an empty kettle.
6
(8), open the lid
(6). The indicator light