Steam Ironing - Breville VIN067 Instructions For Use Manual

Steam ironing

IMPORTANT
Ensure that the soleplate has reached the correct operating
temperature before steam ironing garments. Too low a temperature
will result in water dripping from the soleplate.
NOTE:
For correct steam operation, always ensure that the iron temperature is
set to the two dot (
1 Ensure that the water reservoir has been filled.
2 Press the temperature / standby select button on the iron handle to set the
soleplate to the desired temperature. The iron will now start to heat up and
the temperature indicator light on the handle will flash. When the iron has
reached the desired temperature, the light will stop flashing and light
continuously. The iron is now ready to use.
3 Set the desired amount of steam (see page 8). Use the HIGH steam setting
when ironing thicker fabrics, such as denim or linen on the three dot setting
(•••) or maximum heat setting
Use the LOW steam setting when ironing more delicate fabrics on the two
dot setting (••).
NOTE:
Steam should never be used on fabrics like nylon, acrylic and
synthetics.
4 When the iron is on the garment, press the steam button for a couple of
seconds. It is not necessary to hold the button down continuously, as steam
will still be emitted from the soleplate for a short time after the button has
been released.
If more steam is required, press and hold the steam button.
Always release the button and allow any residual steam to be released
before replacing the iron on its stand.
USING YOUR IRON
••
), three dot setting (
.
7
•••
) or maximum heat setting
7 7
.