Connecting To The Power - Breville VIN067 Instructions For Use Manual

CONNECTING TO THE POWER

When using electrical appliances, basic safety precautions should always
be followed.
WARNING: THIS APPLIANCE MUST BE EARTHED
If this appliance is fitted with a rewirable BS1363, 13 amp plug, the fuse should
be rated at 13 amps and be ASTA approved to BS1362. However if the plug is
unsuitable, it should be dismantled and removed from the supply cord and an
appropriate plug fitted as detailed below.
If this appliance is fitted with a moulded BS1363 13 amp plug, the fuse should
be rated at 13 amps and be ASTA approved to BS1362. If the fuse in a non-
rewirable plug needs to be changed, the fuse cover must be refitted. The
appliance must not be used without the fuse cover fitted.
In the event of the plug being unsuitable, it should be changed and an
appropriate plug fitted as detailed below. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
The wires of the mains lead are coloured in accordance with the following code:
GREEN & YELLOW = EARTH
The wire which is coloured GREEN & YELLOW must be connected to the
terminal in your plug which is marked with an E or by the EARTH SYMBOL
coloured GREEN or GREEN & YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your
plug which is marked with the letter L or coloured RED.
If any other plug is used, a 13 amp fuse must be fitted either in the plug or
adaptor or at the distributor board.
BLUE = NEUTRAL
GREEN & YELLOW
(earth)
BLUE
(neutral)
N
Make sure that the outer sheath of the cable
is firmly held by the cable clamp.
18
BROWN = LIVE
E
13 AMP FUSE
L
BROWN
(live)
or