Before Use - Breville VIN067 Instructions For Use Manual

1 Remove all packaging materials
including any soleplate
protection, taking care not to
damage the soleplate or hot
water pipe. Position the steam
generator iron horizontally on
your ironing board (if large
enough) or on a heat resistant,
secure surface at the same
height as your ironing board.
Never position the steam
generator on an unstable
surface.
NOTE:
Before connecting to the
mains supply, ensure that
the supply voltage is the
same as the one indicated
on the underside of this
appliance.
2 Unwind and straighten the power
cord and hot water pipe.
3 Remove the water tank, by
pressing the release button
located on the underside of the
tank. (Fig 1).
4 Remove the anti-calc cartridge by
lifting from the tank. (Fig 2).

BEFORE USE

5 Fill with cold tap water and
empty. This will rinse out any
foreign particles which may
remain from the manufacturing
process.
6 Refill the water tank with cold
water before replacing the anti-
calc filter.
7 Insert the tank into the base unit,
ensuring that it latches securely
into place.
8 Connect the plug to the mains
supply and turn the power on.
Fig 1
Release Button
Fig 2
5
5 5