Table of Contents
Advertisement
Keypad Operation
NOTE:
24
When power is first supplied to a KTD-400 series keypad, the LCD display will briefly display
the Kalatel name and then appear as shown below:
Figure 44: KTD-400's Normal Operating Display
From this display and by observing the system's monitors, the operator uses the function
keys for control.
Monitor Selection
To select a monitor, press
Example: To select Monitor 12, press
All video switching operations will now be performed on the selected monitor.
Camera Selection
To select a camera, use
Example: To select Camera 345, press
The camera associated with the site will appear on the selected monitor, and all keys
applicable to that site will become operational (e.g., pan, tilt, zoom, etc.).
Engaging Auto Focus on CyberDomes
To engage auto focus on CyberDomes, press and hold
to disengage.
Finding a Preset
To find a preset, select the desired camera, press
preset number. The entry may be one or two digits depending on the largest preset position
programmed in the keypad setup.
Example: To find preset 6, press
The preset option referred to in this chapter will function only if activated during setup.
Preset Tours
To activate a camera's preset tours or ShadowTour, select the desired camera and press
,
, and the tour number (1-4). On older models of the CyberDome, only one preset tour
set
auto
could be programmed. Entering any tour number will activate the preset tour. To deactivate
the tour, press an arrow key.
Camera Sequencing
To place a monitor in the sequence mode:
Select the monitor, and press
display window:
Figure 45: Sequence Selection
ENTER SEQUENCE
NUMBER? _ (1,2,3,4)
KTD-400 Controller Keypad Installation and Operation Manual
CAMERA 000
MONITOR 01
and use
through
mon
0
mon
through
to enter the desired number.
0
9
set
,
set
6
. The following display will appear in the keypad's
seq
to enter the desired number.
9
,
,
1
2
,
,
3
4
5
for one second. Use
auto
and use
through
0
9
.
1034790D / January 2001
or
focus
focus
near
far
to enter the
Advertisement
Table of Contents
