Table of Contents
Advertisement
A-taper
9.7 mm (3/8") x 1/20 Taper (A)
B-taper
12.9 mm (1/2") x 1/20 Taper (B)
For Australia
K-taper shank adapter
(1) Drill bit (ratio shank) (2) Ratio shank adapter Code No. 985761
A ratio shank adapter is provided as an optional accessory, but corresponding drill bits are not provided.
3. Boring work for large-dia. holes (rotation + striking)
+
(1) Center pin (2) Guide plate (3) Core bit
(1) Center pin
Code No. 956009 for core bits with outer diameter of 32, 35 mm (1-1/4", 1-3/8")
Code No. 955165 for core bits with outer diameter of 38, 45, 54, 64, 79, 94, 105, 120 mm (1-1/2", 1-25/32",
2-1/8", 2-17/32", 3-1/8", 3-11/16", 4-1/8", 4-3/4")
[Center pin is not used with core bits of 25 mm (31/32") and 29 mm (1-5/32")]
(2) Guide plate
Core bits with outer diameter of 32, 35, 38, 45, 54, 64, 79, 105, 120 mm (1-1/4", 1-3/8", 1-1/2", 1-25/32",
2-1/8", 2-17/32", 3-1/8", 3-11/16", 4-1/8", 4-3/4")
[Guide plate is not used with core bits with outer diameter of 25 mm (31/32") and 29 mm (1-5/32")]
(3) Core bit
Outer diameter (in.)
25 mm (31/32")
29 mm (1-5/32")
32 mm (1-1/4")
35 mm (1-3/8")
38 mm (1-1/2")
45 mm (1-25/32")
(4) Core bit shank
Code No. 956008 for core bits with outer diameter of 25, 29, 32 and 35 mm (31/32", 1-5/32", 1-1/4" and 1-3/8")
Code No. 955163 for core bits with outer diameter of 38, 45, 54, 64, 79, 94, 105, 120 mm (1-1/2", 1-25/32",
1-1/8", 1-17/32", 3-11/16", 4-1/8", 4-3/4")
992813
+
+
Code No.
955994
955995
955996
955998
956000
955154
Taper shank adapters for A-taper or
985754
B-taper shanks are provided as optional
accessories. Taper shank drill bits are
985755
not provided.
+
+
(4) Core bit shank
Outer diameter (in.)
54 mm (2-1/8")
64 mm (2-17/32")
79 mm (3-1/8")
94 mm (3-11/16")
105 mm (4-1/8")
120 mm (4-3/4")
--- 6 ---
+
Code No.
955155
956002
955157
956004
955159
956006
Advertisement
Table of Contents
