Table of Contents
Advertisement
Wiring connections
The wiring connections are shown in Fig. 9. The Model DH 45SA adopts a plug-in module type wiring system
consisting of plug (A) ass'y and plug (B) ass'y. The plug (A) ass'y connected with the internal wires of the
stator is fitted into the housing. The plug (B) ass'y is fitted into the handle section through the plug holder and
is connected with the switch terminal and cord. Wiring connection is completed when the housing section, the
handle and handle cover section are all assembled and then fastened together with screws. With such a
wiring structure, assembling and disassembling procedures associated with wiring connection have been
largely simplified over previous models.
Housing
Internal wire
Plug (A)
of stator
ass'y
Internal wire
of stator
Plug (A)
ass'y
Side cover ass'y
Plug (B) ass'y
Plug holder
Vinyl tube
Handle
Plug
holder
Plug (B)
ass'y
--- 17 ---
Handle
Switch
Cord clip
Handle
Cord
cover
Fig. 9
Handle cover
Advertisement
Table of Contents
