AEG CTV 4944 DVB-T/DVD Instruction Manual page 73

General Setup Page
TV Display
Here you may adjust the output of the DVD-Player to match the
aspect ration of your display unit.
Background: Unless you have a wide-screen TV, the aspect ratio of
your image display is 4:3. Most movies however, have an aspect ratio
of 16:9, therefore the picture is to wide for TV playback.
You may select here how the playback of the movie will appear on
your output device:
■
4:3 Panscan:
You may only view the center area of the movie. The edges are
cut off.
■
4:3 Letterbox:
You may view the entire range of the movie in a reduced version;
therefore a black bar appears on the top and bottom of the
screen.
■
16:9 Wide:
Choose this option if you have a wide-screen TV. Keep in mind
that movies recorded in an aspect ratio of 4:3 will display in the
same 4:3 ratio. Therefore it will not populate the entire screen of
the wide-screen TV.
NOTE:
"4:3 Panscan" setting is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains scenes shot from different angles press the
ANGLE/TTX button (Fig. 3/10) to select one of the different camera
angles. This function is only available if the DVD contains scenes shot
from different camera angles.
Activate the function as follows.
■
On: The angle mark is displayed.
■
Off: The angle mark is not displayed.
OSD Language
Here you select the OSD language.
Closed Captions
Some DVDs contain closed captions, such as for hearing impaired
persons.
■
On: Closed captions are displayed.
■
Off: Closed captions are not displayed.
English
73