Turn Unit On; Connect To Other Devices - AEG CTV 4944 DVB-T/DVD Instruction Manual

Antenna Connection
Side Panel Inputs
Connect Other Playback Devices
Connect TV Set
WARNING:
■
Otologists advise a against long term use of headphones over an
extended period of time.
Antenna Access (Fig. 2/15)
NOTE:
Please ensure that reception of DVB-T signals is possible in your resi-
dential area. Broadcast information is available on the Internet under:
http://www.ueberallfernsehen.de, or at your specialty dealer.
This unit features an integrated DVB-T receiver.
You must connect your fixed house antenna to receive digital ter-
restrial programs with the integrated DVB-receiver.
In the event your broadcasting area is located within the network core
you may use an optional passive or active DVB-T antenna.
■
Connect your DVB-T antenna system and/or your DVB-T antenna
to ANT. on top of the unit.
USB port (Fig. 1/22; Fig. 2/17)
Connect a USB device directly to the port on the left side of the unit.
Card slot (Fig. 1/15; Fig. 2/16)
Insert an MMC/SD or MS card with the label to the front in the card
slot on the front of the unit.
Turn Unit On (Fig. 1/16; Fig. 2/22)
Turn the unit on by sliding the "ON/OFF" main switch on the side of
the unit to "ON".
NOTE:
In dual mode the DVD MONITOR must be switched on to power the
slave monitor.

Connect to Other Devices

Connect the A/V cable to AUDIO VIDEO IN (Fig. 1/20 or Fig. 2/19) and
to the playback device to view images of another playback device
(such as digital camera). Press the SOURCE button (Fig. 3/28) to switch
the unit to AV IN mode.
NOTE:
In dual mode the AV signal is transmitted to AUDIO VIDEO IN, not to
the slave monitor.
Connect the A/V cable to AUDIO VIDEO OUT (Fig. 1/21 or Fig. 2/18) and
to the TV set to view images on the TV set.
Switch the TV set to AV IN. Observe the TV's user manual.
English
63