System Recovery; System Information - Xcruiser XDSR380HD User Manual

- Check the IP Address of STB
on the Network Setting menu.
- Press Enter button on your PC,
after writing IP Address on the
web browser address line. Ex.)
\\168.158.10.146\storage
- You can see the folder name
of USB in the Storage folder.
- USB: Rear USB Storage Device
- You may be able to load and
retrieve data between the PC
and the STB via the browser.
w w
Dynamic settings (RED key)
- You can make your DDNS
setting in this menu by
pressing the RED button.
- For more details about your
DDNS settings, please ask your
local DDNS service provider.
w w
Wireless LAN can be
supported by using the 'USB
to Wi-Fi' module connected
(*Option)
- By pressing the BLUE button,
you can automatically find
and do the settings for AP.
- For the details of Wireless Wi-
Fi settings, please refer to the
additional AP manual.
NOTE: The speed of Wireless LAN
is slower than the Wired LAN. So, it
could take much more time when
a file copy / move functions are
performed.
NOTE: Inevitably, only the limited
types of Wireless LAN modules are
supported. So, you MUST check for
the compatible / supported types
BEFORE you purchase.
44
Currently supported types are: RT73
series, RT3070 series, RT2870 series.

3.5 System Recovery

w w
System restore to factory default:
Restore the factory set
values in case the user has
encountered some problems
after changing any new
parameters of service data
and other parameters which
may be in error. Press the OK
button to erase all services
and restore default setting.
w w
Reset Configuration data: Maintain
the service data and reset the
configuration data.
w w
Reset Service data: Maintain
configuration data and reset
the service data.
w w
System restore to stored
position: Restore the stored
values including service data
and system parameters. Press
OK button to restore all data.
w w
Store system data: If you want
to use system parameters
and service data in the future,
this menu allows you to store
current state. Press OK button
to store current state.
w w
Delete store position: Delete
stored system data.

3.6 System Information

This menu displays general
information about the
hardware and software
version of your receiver.