Troubleshooting Flowcharts - GE WSLS1100 Technical Service Manual

Check for line voltage in:
Hot
(Gray)
Replace valve
Check frequency in KHz at PCB terminals. (NTR #1-Violet to Org #3.)
Check frequency as shown in WATER LEVEL FREQUENCY CHART.
Check for line voltage at
Start drain/spin PCB terminal - Yellow #1
cycle to NTR #2 (Black) Voltage?
Check resistance at
terminal - Yellow #1 to NTR
#2 (Black)
Resistance 11.8 Ohms?
Line voltage to Does motor
motor run?
Check wiring
Check pressure sensor
Check wiring
harness, connectors,
coil, supply, hoses,
screen
Check wiring
harness, lid
switch, magnet
wires.
Drain pump motor
Replace motor
Drain pump motor
open
Check wiring,
motor
GEA00179