Water System And Filtering - GE WSLS1100 Technical Service Manual

Weight Recognition Function (Load Sensing)
•
The weight recognition function measures the washing load before water is supplied. It does not
function in DELICATES or manual function operations (WASH OPTIONS).
•
The weight recognition function is canceled when water level key is pressed prior to the completion
of weight recognition function.
•
If the current water level is above the lowest level at the beginning of weight sensing, it is automati-
cally set as a high level.
•
If you change wash cycle after sensing weight, the high water level is automatically selected regard-
less of the water level decided by the sensing of weight.
Water Supply Function
• Relations between water level, frequency, and water supply capacity are as follows:
Water Level Frequency Chart
R E S E T
S M A L L
M E D U I M
L A R G E
E X T R A L A R G E
•
If the water level does not reach the selected level within 60 minutes after starting water supply, the
Water Supply Error (7E) is displayed.
Supplementary water supply is performed during
every washing or rinsing operation. The steps are
as follows:
•
Supply water to the water level selected.
•
Perform the ACTIVATE operation for
1.5 minutes.
•
Sense the present water level after stopping
motor.
•
Compare the present water level to the water
level selected.
•
If present water level is less than the water
level selected, supply water to the water level
selected. If present water level is greater than
the water level selected, continue the washing
or rinsing operation.
•
Total time of supplementary water supplying is
not over 30 seconds.

Water System and Filtering

W t a r e S u p l p e i
g ( a ) . l
0
1 1 4 .
1 4 6 .
1 8 0 .
2 2 5 .
– 9 –
d F e r
( n i ) .
0
6 7 .
8 2 .
1 0 3 .
1 3 2 .
Filtering
Filtering action takes place when the impeller
blades, on the underside of the activator,
pump the water up the side of the tub and
through the 2 lint filters on the basket.
q u e n c y
K ( H ) z
2 5 2 . 0
2 3 5 . 4
2 3 1 . 2
2 2 6 . 0
2 2 3 . 5
Activator
12 mm
Screw
36 mm
Nut
GEA00177