Setting The Automatic Open Function; Selecting The Menu Language; Adjusting The Lcd Panel Slide Position - Pioneer AVH-5450DVD Owner's Manual

Section
10 Menu operations
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 27.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)

Selecting the menu language

The menu language can be selected from four
languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language, they can also be displayed
on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup
— On-screen display
! If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
! Some characters may not be displayed
properly.
36
En
1 Display the system menu.
Refer to Introduction of menu operations on
page 27.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
! English (English)—
(Spanish)—Português (Portuguese)
for South American and Oceanian models
! English (English)—Русский (Russian)—
‫ﺔ‬ ‫ﻴ ﺑ ﺮ‬ ‫ﻌ ﻟ ﺍ‬
(Arabic)—
for Middle East Asian and South African
models
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in the
P (park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function to manual
mode.
1 Display the system menu.
Refer to Introduction of menu operations on
page 27.
2 Touch Auto Flap to select whether to
open/close the display automatically or
manually.
Each time you touch Auto Flap the setting
switches between:
! On – The LCD panel will open or close auto-
matically when the ignition switch is turned
on or off.
! Off – You have to press OPEN/CLOSE to
open/close the LCD panel.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
1 Display the system menu.
Refer to Introduction of menu operations on
page 27.
(Thai)—Español
(Persian)