Selecting The Video Of Rear Display; Setting The Automatic Open Function; Setting The Clock - Pioneer AVH-P6500DVD Operation Manual

Other Functions
3 Touch c or d to select an appropriate
setting for polarity.
Each time you touch c or d switches between
the following polarity:
! BATTERY  When the polarity of the con-
nected lead is positive while the gear shift
is REVERSE (R) position
! GND  When the polarity of the connected
lead is negative while the gear shift is RE-
VERSE (R) position
Selecting the video of rear
display
When the navigation video is displayed on
front display, you can select either showing
the navigation video on rear display or the
video of the selected source.
! Only when a Pioneer navigation unit is con-
nected to this unit, you can switch the
video of rear display.
! When selecting SOURCE in REAR DISP,
when the selected source is an audio
source, nothing is displayed on rear dis-
play.
1 Touch A.MENU and SETUP and then
touch REAR DISP.
2 Touch c or d to select the video on rear
display.
Touch c or d until the desired video setting
appears in the display.
! SOURCE  Display the video of the selected
source on rear display
! NAVI  Display the navigation video on rear
display
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Touch A.MENU and SETUP and then
touch FLAP SET.
2 Touch a to turn the set back on, and
the LCD panel slides to the back.
# To turn the set back off, touch b and the LCD
panel slides to the front.
3 Touch c or d to select the display to
open/close automatically or manually.
Touch c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Touch d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.

Setting the clock

Use these instructions to set the clock.
1 Touch A.MENU and SETUP and then
touch CLOCK ADJ.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
# You can also turn the clock display on or off by
pressing FLIP DOWN/CLOCK when the LCD
panel is closed.
# To turn the clock display off, touch ON.
Section
18
85
En