Table of Contents
Advertisement
Section
09
Other Functions
! VIDEO External video component
! DVD Pioneer DVD head unit (e.g., DVH-
P5650MP)
! M-DVD DVD player connected with RCA
cable
# Only when using this unit with SOURCE mode
(S), you can select DVD.
# Only when using this unit with MASTER mode
(M), you can select M-DVD.
Setting the video input 2
You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a con-
nected component as AV-2 source.
! Select B. CAMERA when a rear view cam-
era is installed on your vehicle.
1
Use a, b, c, d and A.MENU to select
AV INPUT2.
2
Press c or d to select the video input 2
setting.
Press c or d until the desired setting appears
in the display.
! OFF No video component is connected
! VIDEO External video component
! B. CAMERA Rear view camera
Setting for rear view camera
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video
(VIDEO 2/BACK CAMERA INPUT jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in REVERSE (R) posi-
28
En
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
! Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
! When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
! To return to the source display, press
V.ADJ.
1
Use a, b, c, d and A.MENU to select
AV INPUT2.
2
Press c or d to select B. CAMERA.
3
Press b to select POLARITY.
4
Press c or d to select an appropriate
setting for polarity.
Each press of c or d switches between the
following polarity:
! BATTERY When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GND When the polarity of the connected
lead is negative while the gear shift is in RE-
VERSE (R) position
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
Advertisement
Table of Contents
