Preparing Cables And Making Connection - Panasonic SC-BTT755 Operating Instructions Manual

SCBTT755_350EBGN_VQT2W23.book 13 ページ ２０１０年６月１８日 金曜日 午後４時５８分

Preparing cables and making connection

Use of the speaker cable stickers is convenient
1
when making cable connections.
e.g. Front speaker (L)

A Speaker cable sticker (supplied)
B Connector
Speaker cable sticker
1 FRONT (L)
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
5 CENTRE
6 SUBWOOFER
Be sure to match the number on each sticker with the
connector colour.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
≥ Don't use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.



FRONT
Lch

 
Colour
WHITE
RED
BLUE
GREY
GREEN
PURPLE


Connecting the speaker cables. Insert the wire fully,
2
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BTT350]
A String (not supplied)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm
r: White
s: Blue line
Push!
VQT2W23
13