Base Station - Kenwood TK-D200G Instruction Manual

Menu Item
Minimum Volume
Monitor
OVCM
Receive Entry
Remote Control
RX Audio Equalizer
RX Auto Gain Control
Scan
Scan Delete/Add
Scrambler
Scrambler key
Selcall
Selcall + Status
Send the GPS Data
Squelch Level
Squelch Off
Stack
22
Description
Set the smallest volume level after turning
the Volume control to its minimum level.
Sets the Monitor function as on or off.
Sets the Open Voice Channel mode as
on or off.
Enter Receive Entry mode.
Enter Remote Control mode.
Sets the receiver equalizer as flat
(normal), high boost (treble boost), or low
boost (bass boost).
Sets the received audio volume level.
Start or stop scanning.
Adds or removes the selected channel to
or from the scan sequence.
Toggles the Scrambler function on and
off.
Enter Scrambler key mode.
Enter Selcall mode.
Enter Selcall mode. Press PF1 while in
Selcall mode to enter Status mode.
If programmed by your dealer,
manually sends your GPS data to the

base station.

Enter Squelch level mode.
Sets the Squelch Off function as on or off.
Places the transceiver in Stack mode.