SELECTING A ZONE AND CHANNEL
Select the desired zone using the key programmed as [Zone
Up/ Down]. Each zone contains a group of channels.
Select the desired channel using the Selector knob (default).
Each channel is programmed with settings for transmitting and
receiving.
•
You can toggle the display between the zone and channel names and
number by pressing the key programmed as [Display Format], or by
accessing the Menu.
Note: If the default settings for
have been changed, use the appropriate keys to select the zone and
channel.
TRANSMITTING
1 Select the desired zone and channel.
2 Press the key programmed as [Monitor] or [Squelch Off] to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
•
For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
n Making Group Calls (Type I Only)
You can make calls to a group ID by using the key
programmed as [Contact List], or by accessing the Menu.
1 Press the key programmed as [Contact List].
2 Press
list.
3 Press and hold the PTT switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
18
/
to select a group ID/name from the
/
and the Selector knob