Table of Contents
Advertisement
SwITCHING POwER ON/OFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise fully to
switch the transceiver OFF.
n Transceiver Password (Type I Only)
If the transceiver is password protected, "PASSWORD"
will appear on the display when the power is turned On. To
unlock the transceiver, enter the password:
1 Select a character using the
•
Alternatively, you can enter the password directly by using
the keypad.
2 Press the
•
This step is unnecessary when using the keypad.
3 Repeat steps 1 and 2 to enter the entire password.
•
Press the
hold
4 Press
•
If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
•
The password can contain a maximum of 6 digits.
ADjUSTING THE vOLUME
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
BASIC OPERATIONS
key to enter the selected character.
or
or
to delete all characters.
or
to confirm the entry.
/
key to delete a character. Press and
keys.
17
Advertisement
Table of Contents
