n Making Individual Calls (Type I Only)
You can make calls to specific persons by using the key
programmed as [Contact List], or by accessing the Menu.
1 Press the key programmed as [Contact List].
2 Press
•
You can also enter a unit ID directly by using the keypad.
3 Press and hold the PTT switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
RECEIvING
Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
n Receiving Group Calls
When you receive a group call and the received group ID
matches the ID set up on your transceiver, you can hear the
caller's voice.
n Receiving Individual Calls
When you receive an individual call, a ringing tone will sound
and the caller's ID will appear on the display. To respond to
the call, press and hold the PTT switch and speak into the
transceiver as you would during a normal transmission.
/
to select a unit ID from the list.
19