Main Jet Holder Removal; Burner Light Removal; Center Brace Removal; End Brace Removal - GE Monogram ZGU375NS Technical Service Manual

Main Jet Holder Removal

1. Remove the maintop (see
2. Remove the 9/16-in. nut on the gas line.
3. Remove the 5/8-in. nut on the jet holder and
remove the jet holder.

Burner Light Removal

1. Remove the maintop (see
2. Turn the top face down on a protected surface.
3. Disconnect the 2 blade connections.
4. Slide the light housing unit in the direction of the
connector blades to remove.
).
Maintop Removal
).
Maintop Removal
– 15 –

Center Brace Removal

1. Remove the maintop (see
2. Remove the simmer jet holders (see
).
Jet Holder Removal
3. Remove the main jet holders (see
).
Holder Removal
4. Remove the heat shield held by 4 Phillips
screws.
5. Remove 3 screws and the center brace.

End Brace Removal

1. Remove the maintop (see
2. Remove the simmer jet holders (see
).
Jet Holder Removal
3. Remove the main jet holders (see
).
Holder Removal
4. Remove the heat shield held by 4 Phillips
screws (if removing the right end brace).
5. Remove the screws to the center brace.
6. Remove 2 holddown brackets from under the
countertop, lift the burner box from the counter,
turn it 10 degrees, and insert cardboard or
wood under the burner box to protect the
countertop.
7. Remove the 4 brace screws from the exterior
of the burner box and remove the brace.
).
Maintop Removal
Simmer
Main Jet
).
Maintop Removal
Simmer
Main Jet