Table of Contents
Advertisement
Quick Links
READ AND SAVE ThESE INSTRUCTIONS
TESTED IN ACCORDANCE wITh ThE LATEST EDITION OF ANSI/UL 507 STANDARD FOR ELECTRIC
FANS AND CAN/CSA-C22.2 NO. 113 STANDARD FOR FANS AND VENTILATORS.
CONVENTIONS USED IN ThESE INSTRUCTIONS
wARNINGS:
Must be followed carefully to avoid personal injury or damage.
NOTES:
Contain helpful hints and tips to facilitate the installation.
IMPORTANT
1.
Before beginning installation, please thoroughly read and become familiar with these instructions.
2.
Installation and service must be completed by a qualified installer or service agency.
3.
Installer: Please leave these installation instructions with the owner.
4.
Owner: Please keep these instructions for local electrical inspector's use and for future reference.
5.
Read the accompanying use and care manual prior to operating this appliance.
TABLE OF CONTENTS
Part No. 65211 Rev. D
Epicure
and Millennia
®
For use with models:
Installation Instructions
R
™
EHD30, EHD36, EHD42, EHD48, EHD54
EHDR30, EHDR36, EHDR42, EHDR48, EHDR54
MHD30, MHD36, MHD48
ange hoods
Page 2
Page 2
Page 2
Page 3
Page 3
Page 4
Page 4
Page 4
Page 4
Advertisement
Table of Contents
Related Manuals for Dacor Epicure EHD3018
Summary of Contents for Dacor Epicure EHD3018
-
Page 1: Table Of Contents
Installation Instructions ange hoods Epicure and Millennia ® ™ For use with models: EHD30, EHD36, EHD42, EHD48, EHD54 EHDR30, EHDR36, EHDR42, EHDR48, EHDR54 MHD30, MHD36, MHD48 READ AND SAVE ThESE INSTRUCTIONS TESTED IN ACCORDANCE wITh ThE LATEST EDITION OF ANSI/UL 507 STANDARD FOR ELECTRIC FANS AND CAN/CSA-C22.2 NO. -
Page 2: Important Safety Instructions
TO PERSONS, OBSERVE ThE service personnel. Locate accidentally. when the FOLLOwING: the nearest Dacor authorized service disconnecting means service representative at cannot be locked, securely Installation work and (800) 793-0093, or at... -
Page 3: Verifying Package Contents
4209, 4809 Configurations "B" that electrical power can be provided in the Overall Dimensions Top View selected location. (MhD Series Shown) (EhD Series Shown) Plan the installation so that all minimum Model No. (A) width (B) Depth clearances are met or exceeded. Dimen- EHD3018 29 7/8” sions shown provide minimum clearances, 3 1/4" x 10" EHDR3018 (759mm) unless otherwise noted. (83x254mm) Duct EHD3618 35 7/8” The specified minimum cabinet depth and 4"... -
Page 4: Cabinet Preparation
EHD4809 1 ½” 1 ½” 16 ½”” 16 ½”” EHDR4809 (419mm) (419mm) (38mm) (38mm) Vertical Electrical Access hole Locations, Top View MHD4809 EHD3018 1 ½” 1 ½” Top of hood EHDR3018 9” (229mm) 9” (229mm) (38mm) (38mm) MHD3018 EHD3618 2”... -
Page 5: Electrical Power Supply Requirements
12. EhDR series hoods are not angular, especially when elbows elbows, transitions, and wall cap equivalent are required. equipped with an internal blower. straight lengths. Installation of an in-line (Dacor 2. If multiple elbows are needed, model ILB8) or remote ensure that there is a minimum blower (Dacor... -
Page 6: Connecting The Electrical Power
Wires connected to hood wiring harness, do not remove company. If you are unable to locate a Dacor Service company, please contact Dacor at (800) 793-0093, or visit us on the web at www.Dacor.com. Do not attempt to repair the appliance yourself. Dacor is not responsible for service required to correct a faulty installation. - Page 8 Web Site: www.Dacor.com For a Dealer/Service: (800) 772-7778 Corporate Phone: (800) 793-0093...