Quizz - GE ZEK957 Series Technical Service Manual

1. If the voltage output or resistance of the low-
voltage transformer is not correct in either the
oven or the microwave, you should replace the
PCB.
_ _ True
2 . To replace the oven door gasket, you must first
remove the oven door from the oven.
_ _ True
3 . After installing a new hinge replacement on the
oven door, you must be sure the new hinge is
in the cocked and locked position before the
oven door can be installed on the oven.
_ _ True
4. When performing a key panel test, the
ohmmeter should show infinity ohms when
depressing the pad, and show some
resistance without depressing the pad.
_ _ True
5. Replacement of the oven thermal cutout
switch and the convection fan motor are the
only components that require removal of the
oven from installation.
_ _ True
__False
__False
__False
__False
__False
Quiz
6. What test is made to check for a damaged
varister?
__Resistance
7. The F-codes for the oven and the F-codes for
the microwave are all very similar, but not the
same.
_ _ True
8. When the oven door is either being locked or
unlocked, both lock switches will be in the
open position and the display will flash the
words LOCK DOOR.
_ _ True
9. Replacement control panel parts come with an
oven PCB and a microwave PCB.
_ _ True
10. Convection fan blade nut has left-handed
threads.
_ _ True
– 66 –
__Voltage __Visual
__False
__False
__False
__False