Display Power; Controls - Raymarine Dragonfly Installation And Operation Instructions Manual

6.1 Display power

Powering the display on
1. Press and hold the POWER button until a beep is heard.
After approximately 5 seconds the splash screen is displayed.
2. Press OK to acknowledge the Limitations of Use disclaimer
when it appears.
Powering the display off
1. Press and hold the POWER button until the countdown
reaches zero.
Note: If the POWER button is released before the countdown
reaches zero, the power off is cancelled.
36

6.2 Controls

1
1 MicroSD card reader – open the card door to insert or remove
a MicroSD card. The card reader is used for electronic charts,
archiving waypoint and track data and user settings.
2 UniControl – provides a rotary control, joystick and an OK push
button for navigating menus and applications and selecting items.
3 Back / View switcher button
• Press once to return to a previous menu or application state.
• Press in the Chart application to exit cursor mode and centre
the vessel on-screen.
• Press in the Sonar or DownVision applications to resume
scrolling from a paused state.
• From the top level application state (Motion mode or Scrolling
mode) press once to open the View switcher.
4 Power / Shortcuts button
• Press once to power the unit on.
• When turned on, pressing the power button will display the
Shortcuts page.
• Press and hold to turn the display off.
UniControl
The UniControl consists of Rotary, Joystick and push button

controls.

4
2
3
Dragonfly / Dragonfly 7
D12631 -2