Adding Smoke Fluid To Your 4-4-2'S Smoke Generator - Lionel Centennialready-to-run O-27 set Owner's Manual

Maintaining and servicing your set
Adding smoke fluid to your 4-4-2's smoke generator
Y our 4-4-2 locomotive is equipped with a
smoke generator that produces safe,
clean white smoke during operation.
The smoke generator requires the periodic
addition of Lionel smoke fluid in order to
function. Pierce the smoke fluid tube end
with a pin, then add 4 to 8 drops of
fluid directly into the loco-
motive's stack. Smoke
production commences
momentarily, faster if you run
your locomotive at high speed. When smoke
production wanes, add more fluid (4 to 8
Do not leave your locomotive on the track in neatral with the throttle turned up.
Note!
This will cause serious damage to the smoke generator.
drops). An idle locomotive will not smoke.
NOTE: Always keep a small amount of smoke
fluid in the locomotive's smoke generator;
the generator's element can become damaged
if operated without smoke fluid. This is
particularly true if your locomotive sits
in neutral for an extended period of
at higher voltages and when the
locomotive is pulling a heavy load or a long
consist.
13
time without smoke fluid
in the generator.
Smoke production is greater