Displaying Gps Monitor Displays - Furuno GP-90 Operator's Manual

8. MENU SETTINGS
DATA 4 I/O SETUP "DGPS" 2/2
To Previous Page
MSB
First Bit
Parity EVEN ODD NONE
Stop Bit 1 2
Baud Rate 4800 9600
: Select
ENT : Enter
Figure 8-27 DATA 4 I/O SETUP
"DGPS" 2/2 menu
7) Press or to select First Bit.
8) Press or to select first bit; MSB or
LSB.
9) Press to select Parity.
10) Press or to select parity bit; EVEN,
ODD or NONE.
11) Press to select Stop Bit.
12) Press or to select stop bit; 1 or 2.
13) Press to select Baud Rate.
14) Press or to select baud rate; 4800
or 9600.
15) Press the [MENU ESC] key.
8.7 Displaying GPS Monitor
Displays
Three GPS monitor displays provide GPS
information:
•
Satellite monitor which shows position of
GPS satellites
•
Beacon receiver monitor which displays
DGPS beacon station information
•
DGPS beacon station message monitor
which displays messages received from
beacon stations. The GP-90 stores the
latest six such messages.
To display the GPS monitor displays;
1) Press [MENU ESC] and [7].
2) Press [ ] to display the GPS monitor
you want to view.
3) Press the [MENU ESC] to escape.
8-12
LSB
MENU : Escape
Number, bearing and elevation angle of all satellites
in view of the GPS receiver appear. Satellites being
used in fixing position are circled with a solid line;
satellites not being used in fixing position are circled
with a dashed line.
Satellite
distribution
Fixing date and time
Aug 21 2003 23:59'59" U
N
24
01
12
W
31
19
09
18
16
S
:BEACON RCVR MONITOR
MENU:Escape
Satellite number with circle
is used for positioning.
Receive signal level
(When signal level is more than 35, it is
used for positioning.)
*: This indication appears in the WAAS mode.
SATELLITES MONITOR
Aug 21 2003 23:59'59" U
DGPS INTEGRITY STATUS
NAME:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ID: _ _ _ _
Bit Rate: _ _ _ bps
Sig Strength: _ _ dB
DGPS DATA:
BEACON STATION:
:STATION MESSAGE
MENU:Escape
DGPS data and DGPS
station receiving condition
BEACON RECEIVER MONITOR
Aug 21 2003 23:59'59" U
Message 1/6: '04- 9- 8 23:58J
2330, esaki, SSE, 15m, 1010hPa,
Wave 2m
Message 2/6: '04- 9- 8 23:45J
2330, magosaki, SSE, 9m, , ,
:SATELLITES MONITOR
MENU:Escape
STATION MESSAGE
Return to SATELLITES
MONITOR
* Format and content of messages depends on beacon
reference station. The example shown here is from a
Japanese beacon reference station.
GPS fix
state
W3D 100m
SAFE
SV (PRN)
SNR
30 40
50
01
12
31
16
E
08
18
19
09
08
24
134 *
DOP:1.5
DOP value
D3D 100m
SAFE
Health: _
Freq: _ _ _ . _ kHz
SNR: _ _ dB
Good
Good
DGPS station
data
D3D 100m
SAFE
Latest 6
mesages*