Impex COMPETITOR WM-354 Owner's Manual page 8

STEP 4 (See Diagram 4)
A.) Attach the hole-side of the Backrest Supports (#14) onto both ends of the pivot on the Main
Seat Support (#6). Place the other end rest against the Backrest Adjustment Bar (#4).
B.) Place the Backrest Board (#15) onto the Backrest Supports. Secure it with four M6 x 1
3/8" Hex Bolts (#37) and Ø ½" Washers (#38).
C.) Place the Seat Pad (#16) onto the Main Seat Support. Secure it with four M6 x 1 3/8" Hex
Bolts (#37) and Ø ½" Washers (#38).
7
DIAGRAM 4