Impex APEX WM-348.1 Owner's Manual
  1. Manuals
  2. Brands
  3. Impex Manuals
  4. Home Gym
  5. APEX WM-348.1
  6. Owner's manual
Impex APEX WM-348.1 Owner's Manual

Impex APEX WM-348.1 Owner's Manual

Impex owner manual bench wm-348.1
Hide thumbs

Advertisement

Table of Contents

NOTE:
Please read all
instructions carefully
before using this product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Exploded Diagram
Parts List
Warranty
Ordering Parts
Model
WM-348.1
Retain This
Manual for
Reference
July 1, 2005
OWNER'S
MANUAL
WM-348.1 BENCH
14777 Don Julian Rd., City of Industry, CA 91746
Tel: (800) 999-8899 Fax (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
APEX
IMPEX INC.

Advertisement

Table of Contents
loading

Related Manuals for Impex APEX WM-348.1

Summary of Contents for Impex APEX WM-348.1

  • Page 1 Exploded Diagram Parts List Warranty Ordering Parts Model WM-348.1 Retain This Manual for Reference July 1, 2005 OWNER'S MANUAL APEX WM-348.1 BENCH IMPEX INC. 14777 Don Julian Rd., City of Industry, CA 91746 Tel: (800) 999-8899 Fax (626) 961-9966 www.impex-fitness.com info@impex-fitness.com...

  • Page 2: Table Of Contents

    WARRANTY...….12 ORDERING PARTS...….12 BEFORE YOU BEGIN Thank you for selecting the APEX WM-348.1 BENCH by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.

  • Page 3: Important Safety Notice

    PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

  • Page 5: Assembly Instruction

    ASSEMBLY INSTRUCTION Tools required assembling the machine: Two Adjustable Wrenches and Allen Wrenches STEP 1 (SEE Diagram 1) A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#59) in the Mid-span. Secure them with two M10 x 2 3/8” Hex Bolts (#2), four Bracket (#7), and two M10 Aircraft Nuts (#4) on each end of the Cross Brace.
  • Page 6 STEP 2 (SEE DIAGRAM 2) A.) Connect the Front Stabilizer (#42) to the Main Seat Support (#52) and secure them with two M10 x ¾” Hex Bolts (#46), four DO NOT tighten the nuts and bolts yet. B.) Connect the Main Seat Support (#52) to the open bracket on the Cross Brace (#59). Secure the rear hole on the bracket with one M10 x 2 3/8”...
  • Page 7 STEP 3 (SEE DIAGRAM 3) A.) Attach a ¾” Washer (#3) onto a M10 x 6 ¼” Hex Bolt (#54). Insert the Bolt through the Butterfly (#17). Place a M10 Regular Nut (#57) onto the Bolt. Then insert the Bolt through the hole on the Rear Upright Beam (#1).
  • Page 8 STEP 4 (SEE DIAGRAM 4) A.) Attach the hole-side of the Backrest Supports (#60) onto both ends of the Pivot on the Main Seat Support (#52). The other side rest against the Backrest Adjustment Bar (#10). B.) Place the Backrest Board (#18) onto the Backrest Supports (#60). Secure it with four M6 x 1 3/8”...
  • Page 9 STEP 5 (SEE Diagram 5) A.) Attach the ball end of the Cable to the Pulley (#28). Place the Pulley in the open slot on the Lat Bar Frame (#31). Secure it with one M10 x 2 1/8” Hex Bolt (#32), two Bushings (#29), two ¾”...
  • Page 10 STEP 6 (SEE Diagram 6) A.) To store the bench in a vertical position, remove the Arm Curl and the Lat Bar Frame from the bench and place them onto the storage posts on the Rear Upright Beams. B.) Pull out the 3” Lock Pin (#58) on the Main Seat Support to fold up the bench. Make sure to re-insert the Lock Pin on the bracket to secure the vertical position.

  • Page 12: Parts List

    PARTS LIST KEY NO. DESCRIPTION Rear Upright Beam M10 x 2 3/8” Hex Bolt ¾” Washer M10 Aircraft Nut 1 5/8” x 3 1/8” Square End Cap 1 ¼” Square End Cap Bracket Lock Knob 1” Round End Cap Backrest Adjustment Bar Bar Catch Panel ¾”...

  • Page 13: Impex Inc

    No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.

Table of Contents