Chevrolet 2013 Camaro Owner's Manual page 47

5. Locate the pressure release bolt
on the top of the hydraulic pump.
6. Using the provided wrench, turn
the pressure release bolt
counterclockwise no more than
one turn.
7. Reinstall the trim cover.
8. Pull the front of the convertible
top up and forward.
9. After the convertible top is
completely raised, release the
convertible top front latch from
the lock position by pulling down
and turning it clockwise.
10. Lock the convertible top front
latch by pulling down and
turning it counterclockwise,
then push it up.
When power is restored to the
vehicle, the pressure release bolt
must be tightened using the
provided wrench, by turning it
Keys, Doors, and Windows
clockwise. The convertible top
button can then be used to lower or
raise the convertible top.
If the convertible top is operated
multiple times, the engine should be
running to prevent drain on the
vehicle's battery. Under certain
conditions, the Driver Information
Center (DIC) may display a
message regarding the convertible
top. See Convertible Top Messages
on page 5 34.
If the battery has been
disconnected, the power windows
must be initialized for the
convertible top to operate. See
Power Windows on page 2 14.
Cleaning the Convertible Top
The convertible top should be
cleaned often. High pressure car
washes may cause water to enter
the vehicle.
Hand wash the convertible top in
the shade. Use a mild soap,
lukewarm water, and a soft sponge.
A chamois or cloth may leave lint on
2-21