Chevrolet 2013 Camaro Owner's Manual page 215

2. Turn the key to the ON/RUN
position.
3. Release the parking brake. See
Parking Brake on page 9 35.
4. Press the shift lever button.
5. Move the shift lever to the
desired position.
If still unable to shift out of P (Park):
1. Fully release the shift lever
button.
2. Hold the brake pedal down and
press the shift lever button
again.
3. Move the shift lever to the
desired position.
If the shift lever still cannot be
moved from P (Park), see Shift Lock
Manual Release.
Shift Lock Manual Release
The transmission has an electric
park lock called a shift lock manual
release. The key must be in the ON/
RUN position, and the brake pedal
pressed so the shift lever can be
moved from the P (Park) position.
If the battery has lost power, the
shift lever cannot be moved from
P (Park) unless the shift lock manual
release is disengaged manually.
To access the shift lock manual
release:
1. Apply the parking brake.
2. Pull the passenger side console
trim away from the front half of
the console to expose the shift
lever mechanism.
Driving and Operating
3. Remove the retainer and the
shift lock manual release cover.
4. Push and hold the manual
release lever toward the rear of
the vehicle.
5. Press the select button and
move the shift lever to the
N (Neutral) position.
6. Release the lever.
7. After the vehicle has been
moved, align the shift lock
manual release cover plate and
install the retainer so the
automatic transmission can
operate properly.
9-23