License Plate Lamp; Replacement Bulbs - Chevrolet 2013 Camaro Owner's Manual

10-40 Vehicle Care

License Plate Lamp

To replace one of these bulbs:
1. Unclip the license plate lamp
from the fascia opening.
2. Pull the license plate lamp down
through the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the lamp
socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the fascia
opening until the clip is in place.

Replacement Bulbs

Exterior Lamp
Daytime Running
Lamp (Uplevel
vehicles)
Fog Lamp
(Except ZL1)
Front Park and Turn
Signal Lamp
Halogen Headlamp
License Plate Lamp
Rear Turn Signal
and Taillamps
For replacement bulbs not listed
here, contact your dealer.
Bulb
Number
PSX26W
PSX26W
3457NAK
H13
W5W
3157K