Headlamp High/Low-Beam; Flash-To-Pass; Daytime Running; Lamps (Drl) - Chevrolet 2013 Camaro Owner's Manual

6-2 Lighting
A warning chime sounds if the driver
door is opened when the ignition
switch is off and the parking lamps
are on.
(Headlamps): Turns the
headlamps on together with the
lamps listed below.
Parking Lamps
Taillamps
Sidemarker Lamps
License Plate Lamps
Instrument Panel Lights
A warning chime sounds if the driver
door is opened when the ignition
switch is off and the headlamps
are on.
(Front Fog Lamps): Turns the
fog lamps on or off. The fog lamps
come on together with the following:
Parking Lamps
Taillamps
Sidemarker Lamps
License Plate Lamps
Instrument Panel Lights
See Front Fog Lamps on page 6 5.
Headlamp High/
Low-Beam Changer
Push the turn signal/lane change
lever away from you and release, to
turn the high beams on. To return to
low beams, push the lever again or
pull it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

The flash to pass feature works with
the low beams or Daytime Running
Lamps (DRL) on or off.
To flash the high beams, pull the
turn signal/lane change lever all the
way toward you, then release it.

Daytime Running

Lamps (DRL)

Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional Daytime Running
Lamps are required on all vehicles
first sold in Canada.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.