Impex PLATINUM MARCY PM-3000 Owner's Manual page 11

STEP 3 (See Diagram 3)
A.) Attach the Front Press (#6) to the Upper Frame (#4). Align the holes. Insert the Front Press
Axle (#35) through the holes. Secure it with one M10 x 5/8" Allen Bolt (#53), one Ø ¾" Lock
Washer (#57), one Ø ¾" Washer on each end of the Axle. Do not over tighten the Bolts.
Make sure the Front Press is able to swivel. Cover the two Bolts with two Ø 1 3/8" End Caps
(#39).
B.) Attach the Backrest Board (#18) to the Vertical Frame (#3). Secure it with two M8 x 3 ½"
Allen Bolts (#55), and two Ø 5/8" Washers (#61).
10