Setting; General Setting; Setting The Language (Cyrillic) - Alpine CDE-136BT Owner's Manual

SETUP
SOURCE/ Rotary encoder
/ENTER

AUDIO/SETUP

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
*1
 GENERAL  DISPLAY  TUNER  iPod 
AUDIO
*2
BLUETOOTH
GENERAL:
*3
 CYRILLIC  AUX SETUP  AUX NAME
CLOCK ADJ
PLAY MODE  DEMO
DISPLAY:
ILLUM  DIMMER  SCROLLTYPE
TUNER:
WEATHER  SPORTS  D DISPLAY  FM SWITCH  DAB ANT
 PTY31  NEWS  AF
*8
AUTO CLOCK
iPod:
iPod LIST
*1 Refer to "Audio Setup" on page 19.
*2 Refer to "BLUETOOTH Setup" on page 28.
*3 Refer to "Setting Time" on page 10.
*4 Displayed only when AUX SETUP is set to ON.
*5 Refer to "Turning AF (Alternative Frequencies) ON/OFF" on
page 12.
*6 Refer to "Receiving RDS Regional (Local) Stations" on page 12.
*7 Refer to "PI SEEK Setting" on page 12.
*8 Refer to "Setting the Time to automatically Adjust" on page 13.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF)
24
-EN
*4

*5 *6 *7
 REGIONAL  PI SEEK 
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

General Setting

GENERAL is selected on the setup main menu in step 2.

Setting the Language (CYRILLIC)

Set the language to be displayed on the unit.
 Setting item: CYRILLIC
Setting contents:
OFF (Initial setting) / ON
OFF:
English, Latin character
ON:
Russian, English
Note
• Refer to the table below for the Russian display on this unit.
D:
C:
D C D C D C D C