Crank Set; Pedal; Recommended Tightening Torques - Canyon Mountain bike Manual

100

RECOMMENDED TIGHTENING TORQUES

RECOMMENDED TIGHTENING TORQUES
Component Bolted connection
Rear derailleur Fastening bolt
Cable fixing bolt
Pulley bolt
Front derailleur Fastening bolt
Cable fixing bolt
Shift lever Fastening bolt for gear shifter pod
Hole covering
Clamp fixing bolt (Allen bolt)
Cable stop on frame
Hub Quick-release lever
Counter nut for bearing adjustment with
quick-release hubs
Free-wheel hub Sprocket cluster lock ring

Crank set

Crank fixing bolt (cotterless, grease-free)
Crank fixing bolt (Shimano Octalink)
Crank fixing bolt (Shimano Hollowtech II)
Crank fixing bolt Isis
Crank fixing bolt Gigapipe
Chainring bolt
Sealed cartridge Shell Shimano Hollowtech II
SRAM Gigapipe
Bottom bracket Octalink

Pedal

Pedal axle
Shoe Cleat bolts
Spike
Seat post Fixing bolt of seat clamp
at seat post head
* www.shimano.com
** www.sram.com
*** These are guide values given by the above-mentioned component manufacturers.
Observe any values given in the component manufacturers' operating instructions.
Shimano* SRAM **
8-10 Nm 8-10 Nm
5-7 Nm 4-5 Nm
3-4 Nm
5-7 Nm 5-7 Nm
5-7 Nm 5 Nm
5 Nm 2.5-4 Nm
0.3-0.5 Nm
5 Nm
1.5-2 Nm
5-7.5 Nm
10-25 Nm
30-50 Nm 40 Nm
35-50 Nm
35-50 Nm
12-15 Nm
31-34 Nm
48-54 Nm
8-11 Nm 12-14 Nm (steel)
8-9 Nm (alu)
35-50 Nm 34-41 Nm
50-70 Nm
35 Nm 31-34 Nm
5-6 Nm
4 Nm
20-29 Nm ***
Some components are directly marked
i
with the necessary tightening torque.
Strictly observe the torques given on the labels or
imprints.
RECOMMENDED TIGHTENING TORQUES
The Canyon torque wrench
Mounting the handlebars with the Canyon torque wrench
101