Table of Contents
Advertisement
Scan Operation
17
Scan List Programming/Viewing
This radio can have a preprogrammed Scan List
loaded at the factory. If you desire to make changes in the
scan list, follow the steps given below:
1.
Press the menu button until "SCAn PrG" is displayed.
2.
Press Select button located above the PTT switch.
3.
Four beeps are sounded and display shows the default
home channel and the scan status. The scan icon
indicates that the displayed mode is in the scan list.
4.
To add a member or delete a member from the list,
press the select button. To scroll through active scan
members list, press
through all modes in the radio (trunk and
conventional) use the
If you want to add a member to the list, and the list is
full, then the radio indicates with a medium beep.
5.
When you have finished scan programming/viewing,
press the
(Home) button to exit.
(Scan) button; but to scroll
or
buttons.
Hide quick links:
Advertisement
Table of Contents
