CDA hc9625 Manual For Installation, Use And Maintenance page 10

To adjust the power level when the booster is set:
Touch for the zone required.
Touch and hold or until the required power level shows on the
zone display.
To cancel the booster:
Touch for the zone required.
Touch and hold until the zone display shows "0".
Then touch and hold or until the required power level shows on
the zone display. "A" will no longer show on the zone display.
The Timer/ Minute Minder:
The timer allows you to preset the length of time any of the zones
will be on, between a minimum of one minute and a maximum of 99
minutes. The timer can be used on each zone separately and can
also be used as a minute minder, to countdown the time without using
any of the zones.
To set the timer:
Switch on the zone and set the power level.
Whilst the dot is showing on the zone display, touch . The timer
display will show "00" and the timer zone indicator will switch on to
show which zone timer is being set.
To set the time from zero, touch and hold until the required cooking
time shows on the display.
To go straight to 30 minutes, touch .
Then touch either or to adjust the time further.
10