Reversing The Door - CDA CI921 Manual For Installation, Use And Maintenance

Reversing The Door

The door on the dryer can be positioned
B
either with the left or right hand hinging,
E
C
as shown in fig.6.
D
A
Please note: power tools must not be
used when reversing the door.
How to reverse the door
G
Open the door
Undo screw A, remove switch strike B
and replace screw A.
F
Remove screws C and latch plate D.
Remove hinge cover screw E.
Close the door.
Pull hinge cover F forwards to remove it.
G
Remove two outer screws G.
Remove door.
F
Fit latch plate D with screws C.
Reverse the door and fit to the dryer in
the closed position.
B
Refit screws G and hinge cover F.
E
Open the door.
C
Fit screw E to secure hinge cover.
D
A
Remove screw A at the top of door and
refit switch strike B as shown.
fig. 6
15