1.Introuduction The Bluetooth Headset allows you freedom to make and receive calls while on the move or in the office. You can connect the headset to a compatible phone that supports Bluetooth wire -less technology. Read this user guide carefully before using the headset. Read also the user guide for your phone, which provides important safety and maintenance information.
2.Get started Overview The headset contains the following parts: (1)Charger connector (2)Earloop (3)Bluetooth headset Before you can start using the headset, you must charge the battery and connect the headset with a compatible phone. Note: Pats of the headset are magnetic, metallic mater -ials may be attracted to the headset, do no place cr -edit cards or other magnetic storage media near the headset, because information stored on them may be...
Chargers and batteries Check the model number of any charger before using it with this device. Warning: use only chargers approved for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous, For availability of approved enhancement, please check with your dealer.
Charge the battery This device has an internal non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. 1. Connect the charger cable to the headset. 2. Connect the charger to a wall outlet. The red indicator light is on during charging.
Page 7
Connecting the Headset to a compatible Phone. 1. Activate the Bluetooth feature on your Phone and have it ready to search for Bluetooth devices, see user guide of your Phone for Instructions. 2. Switch on the Headset and keep your finger on the Power Button, the Blue Indicator light will flash and then stay on.
Disconnect the headset from the phone. To disconnect the headset from your phone (for example, to connect the phone to another Bluetooth device). Do one of the following: Switch off the headset Disconnect the headset in the Bluetooth menu of your phone. Move the headset more than 10 meters (30 feet) away from the phone.
Troubleshooting If you cannot connect the headset to your phone, do as follows: Ensure that the headset is charged, switched on, and paired with and connected to your phone. Ensure that the Bluetooth feature is activated on your phone. Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices.
Need help?
Do you have a question about the X4 and is the answer not in the manual?
Questions and answers