Installing the VCR
Installing the Enclosure Cover
Rev 1.01
To install the VCR:
1.
Slide the VCR into the foam padded holder in the VCR enclosure base and secure it in
place with the velcro retaining strap. Do not press on the center of the VCR.
2.
For inverted mount installations, see
Figure 2-3
Enclosure Inverted Mount Installation
VCR
To install the enclosure cover:
1.
Unlock the access panel in the front of the enclosure cover, using one of the keys
supplied with the VCR enclosure.
2.
Place the enclosure cover inside the side rails of the enclosure base.
3.
Slide the cover toward the rear of the base (see
4.
Replace the access panel and lock it to secure the cover to the base.
HTR62 Installation and Operating Guide
Figure
2-3.
Inverted VCR enclosure base
Figure
9
2-4).
Document 900.0341
12/05