6.7.1
Descaling
machine with constant water supply
Preparation
Touch
Touch
until the desired program is displayed
Select the desired program with
Remove the milk hose
Turn off mains tap
Remove and empty drip tray
Replace drip tray
Remove water tank
Turn and remove seal plug on water tank connector
counter-clockwise (flat screwdriver, see illustration
1 and 2)
Mix the two bottles of liquid descaling agent in the
water tank with 1 bottle of warm water
If crystals have formed when stored below the freezing
point, stir until all crystals present in the liquid
descaling agent have dissolved
Insert the water tank filled with descaling solution, and
confirm on the display
Place a collection container with approx. 5 litres
capacity under the combi spout
Descaling
Descaling starts. Duration approx. 13 minutes.
After descaling, carefully empty the collection container
Replace the collection container
Empty remaining descaling solution from water tank
Rinse water tank and fill to maximum with clean, cold
tap water. See the markings on the outside of the water
tank.
Replace the water tank
User Manual WMF 1200 S
Care
Illustration 1
Illustration 2
Crystals may form in the liquid
descaling agent when stored.
The crystals must not enter the
machine.
The ideal water temperature is
approx. 37 °C.
51