CDA FWV160 Manual For Installation, Use And Maintenance page 8

Mounting the fascia
6. Open the drawer and remove the screws located on either side, as
shown in figure 5, to allow the drawer to be removed completely.
7. Locate the fascia panel on the front of the appliance and secure
with four screws, as shown in figure 6, ensuring that it aligns with
adjacent fascia panels and that the lower edge of the fascia panel
aligns with the lower edge of the drawer front (for 140mm fascia
panels)
8. Connect to the mains supply.
8
460
241
219
67
26,5
40,5
fig. 5
fig. 6