Table of Contents
Advertisement
Troubleshooting
If you have any problems with your appliance, you should check the troubleshooting guide prior to calling CDA
Customer Care to prevent unnecessary service calls and potential cost.
If the appliance is not working, check
•
There is power to the appliance
•
The house fuses or circuit breakers are intact and the fuse in the plug has not blown.
•
The plug socket is functioning correctly. To check this, plug another electrical appliance in to see if the socket is working.
•
The ambient temperature is between 16º and 32ºC.
The appliance is working, but not very well, check
•
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The drawer is closing properly.
•
The drawer seal is sealing properly
•
There is enough ventilation at the side and rear walls.
•
The ambient temperature is between 16º and 32ºC.
The appliance is noisy, check
•
The appliance is level and stable.
The light does not work, check
•
There is power to the appliance
•
The house fuses or circuit breakers are intact and the fuse in the plug has not blown.
Please note:
The LED lighting cannot be replaced without a service call. If the light fails, contact CDA Customer Care.
The drawer will not close properly, check
•
The appliance is level and stable.
•
If the drawer has been removed, it may not have been correctly refitted
•
The drawer seal is clean
6
Advertisement
Table of Contents
